Fluidex’s oil moisture meter features a compact design and is extremely simple to operate – replacing the sample requires only swapping the removable container and pressing the Start button to begin the measurement. The device is multifunctional and does not require a personal computer for operation. Its protective design – including a stabilized power supply, metal vandal-resistant buttons, safeguarded sensing elements, and integrated protection of all electrical components – allows it to be used directly in the field near the transformer. Measurement results can be immediately printed thanks to the built-in printer.
Categories : Oil Testing
FLD 1T Oil Moisture Meter
The FLD 1T transformer oil meter is engineered to determine the mass fraction of dissolved moisture in insulating mineral oils with a kinematic viscosity of up to 70 cSt at 50°C. When using the unit, it is important to keep in mind that FLD 1T provides a rapid indicative measurement of moisture content. For definitive, certified results, a full laboratory analysis is still required.
-
Description
The FLD 1T transformer oil meter is engineered to determine the mass fraction of dissolved moisture in insulating mineral oils with a kinematic viscosity of up to 70 cSt at 50°C.
When using the unit, it is important to keep in mind that FLD 1T provides a rapid indicative measurement of moisture content. For definitive, certified results, a full laboratory analysis is still required.
Conventional laboratory testing typically takes at least one day and demands considerable labor and financial resources. FLD 1T enables immediate assessment of transformer oil condition directly on site, allowing operators to make prompt, informed decisions near the transformer without delays.
The device integrates all components necessary for straightforward and user-friendly operation, including:
- an LCD display that shows the measured moisture content;
- an intake chamber for collecting the oil sample;
- a moisture sensor that determines the mass fraction of water in lubricating and insulating oils;
- a built-in printer for generating hard-copy test reports.
-
Specification
№ Parameter
Value
1 Operating range, aw (active water (aw)) 0…1
2 Operating range of dissolved water content measurement, ppm 0….500
3 Precision at 68 °F (20 °C) ±0.02 aw (0…0.9 aw) ±0.03 aw (0.9…1 aw)
4 Temperature measurement yes
5 Operating medium temperature, °F (°С) 32…131 (0…55)
6 Required power, W 10
7 Single phase 60Hz (50Hz) AC power supply voltage, V 120 (230)
8 Dimensions, in (mm) – length
– width
– height
8 (190)
10 (255)
14 (365)
9 Weight, lbs (kg) 13.2 (6)
-
Advantages
-
Application
FLD 1T meter can be used for measuring the mass fraction of dissolved moisture of transformer oils, hydraulic oils, lubricating oils and diesel fuels.
-
Configurator
Loading...
